Automatic Linear Type Bottle Barrel Pure Drinking Water Washing Filling Capping Sealing Labeling Line Machine

• After-sales Service: Onsite Installation Is Offered/Long Time Technical
• Warranty: 1
• Type: Volumetric Filling Machine
• Automatic Grade: Automatic
• Material Type: Liquid
• Filling Valve Head: Multi-Head
• Model NO.: Automatic Linear Type Water Filling Machine
• Feed Cylinder Structure: Multi-Room Feeding
• Packaging: Bottle
• Packaging Material: Plastic
• Transport Package: Customer Selection
• Specification: Customer Sized
• Trademark: Union
• Origin: China

Product Description

Introduction 
This pet bottle filling machine is composed of barrel washing, filling and sealing. It is specialized in filling 3gal or 5gal barreled drinking water. There are model 100, model 200, model 300, model 450, model 600, model 900 and model 1200 to be selected. Washing machine washes and sterilizes barrel by multiply spraying cleaning solution and disinfectant. The disinfectant could be recycled. Automatic sealing machine ensures barrel cap sterile and clean. With advantages of complete functions, novel design and high degree of automation, the drinking water bottle filling machine  is a new electromechanical barreled drinking water filling equipment, which owns automatic functions of washing, sterilizing, filling, capping, counting and output.

Work Flow
Empty bottle→alkali water washing→recycled water washing→ clo2washing→dripping→product water washing→dripping→filling →capping

Product Details

 

 

Feature

1.The liquid filling machine consists of stainless square tube bonding wire 25*25, drive mechanism, pneumatic reversing capping, electric control and water tank spray device, etc. Weld assembly is hard-wearing and corrosion resistant.

2.It adopts circulating water supply, non-circulating water supply and compound water supply. Any mode could be selected as required.

3.Good cleaning effect. It washes inner and outer surface of the barrel all around.

4.The whole washing process only takes two steps: open and close the door.

5.Automatic water filling machine adopts three-phase four-wire system. N is null line. Fill water into tank after power on and check motor rotate direction. Connect switch and turn on the panel power. Then unfold the cover and the machine will run.  

6.Cap opening machine is used for separation of cap and the drinking water recycling barrel(3gal or 5gal) without wear and distortion. The barrel could be reused after sterilizing.

7.It adopts pneumatic power with air supply pressure of 0.5MP/cm², air supply capacity of 0.1m²/min, operational capacity of 200-300pcs/h. Turn on the air supply, then the machine will run by connecting foot switch and main pipe.

Technical parameter

Model	NT-120	NT-300	NT-450	NT-600	NT-900	NT-1200
Filling head qty	1	2	3	4	6	8
Volume	3gal or 5gal	3gal or 5gal	3gal or 5gal	3gal or 5gal	3gal or 5gal	3gal or 5gal
Dimension	Φ240*430 Φ270*490	Φ240*430 Φ270*490	Φ240*430 Φ270*490	Φ240*430 Φ270*490	Φ240*430 Φ270*490	Φ240*430 Φ270*490
Capacity	120	300	450	600	900	1200
Air supply pressure	0.4-0.6	0.4-0.6	0.4-0.6	0.6	0.6	0.6
Air consumption	0.37	0.6	0.8	1	1.5	1.8
Power	1.38	3.8	3.8	7.5	9.75	13.5
Weight	680	1500	2100	3000	3500	4500